GE dimensions JBS55WJ/BJ - GE 30 Free-StandingElectric Range, GE Appliances, outlet area, 240V

GE Appliances

JBS55WJ/BJ – GE® 30" Free-Standing Electric Range

Dimensions and Installation Information (in inches)

	30
2-1/2
	25
Acceptable electrical�	2-1/2
outlet area

	29-7/8
	7-1/2
	46-7/8
	Preferred electrical�
�	outlet area�

Roughed-in dimensions

25-3/8 *

47-5/8

*Dimension from wall to front of closed door handle is 27-3/4".

Specification Created 5/04

Amp Rating

240V	10.5
208V	7.9

Breaker Size

40 Amps†

†Note: Check local codes for required breaker size.

A properly grounded branch circuit with a 3 prong grounding type receptacle is required for GE ranges.

Receptacle Locations

Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall.

Note: Conforms to U.L. requirements for 0" spacing for adjacent walls below countertops. To reduce possibility of scorching walls, it is recommended a minimum of 1-1/2" spacing be allowed from adjacent side walls to allow for possible extended, high-heat, no-load heating element operation.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

All GE ranges are equipped with
an Anti-Tip device. The installation		Listed by
of this device is an important,
		Underwriters
required step in the installation
	R	Laboratories
of the range.

For answers to your Monogram,® GE Profile™ or

GE® appliance questions, visit our website at

GEAppliances.com or call

GE Answer Center® service, 800.626.2000.

321636