GE dimensions JCP67YWW-40 Free-StandingElectric Range, Top View, 44-1/8 40-1/8 47-1/4 27-3/8

GE Appliances

JCP67YWW—40" Free-Standing Electric Range

Installation Information (Dimensions in inches)

Top View

KW Rating

44-1/8**

40-1/8

47-1/4

27-3/8*

*Dimension from wall to front of closed oven door handle.

**Includes required 4" door swing allowance for side-hinged oven or stor- age compartment door.

		40-1/8
4
18-1/2		C
		L
			10
		20
			Wall
	10
7" MAX.

		Locate outlet
10	Floor	in shaded area

For answers to your Monogram,®GE ProfilePerformance Series,™ GE Profile,™ GE,Hotpoint and RCA appliance questions, callGE Answer Center® service, 800.626.2000.

240V	14.2
208V	10.7

Note: All 40" Ranges conform to U.L. requirements for 0" spacing from range to adjacent walls below countertop. To reduce possibility of scorching of the side wall adjacent to the heating elements, it is recommended a minimum 2" spacing from adjacent side walls be allowed for possible extended high-heat, no-load heating element operation.

Receptacle Locations: For all 40” Free-Standing Ranges locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against rear wall.

	All GE ranges are equipped with
	an Anti-Tip device. The installation		Listed by
	of this device is an important,
			Underwriters
	required step in the installation
		R	Laboratories
Created 7/97	of the range.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.