GE JDP39BKBB dimensions JDP39WK/CK/BK, GE 30 Drop-InElectric Range, KW Rating, 240V, 10.8, 208V

JDP39WK/CK/BK

GE® 30" Drop-In Electric Range

Dimensions and Installation Information

KW Rating

240V	10.8
208V	8.1

6" Min. from walls

30" Min.

Note: Cabinets installed adjacent to drop-in ranges must have an adhesion spec of at least 194°.

Important

30” Drop-In Ranges are designed to hang from the countertop. It does not rest on the floor. For installation alternatives, refer to installation instructions packed with product.

Note: 30” Drop-In Electric Ranges conform to U.L. requirements for 3” minimum spacing between range and side walls above countertop.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

2-7/8" To Front Surface of Countertop

2431-1/4

27

20-5/8" Door

Clearance

From Front

Surface of

Countertop

	23-3/16
If necessary,
build upsides	27-1/2
to 1-1/4" thick
to provide
countertop	36
support
Accessory
Backguard
A/B*	30

30" Min.

Acceptable Electrical Outlet
Area Also In Adjacent	18"	Min.
Cabinet Or Under Floor
Conduit is 40" long

25

7-1/2

Acces

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

26-1/2**	*JXS37 is 5-1/4" and JXS32 is 4"
(excluding handle)	**Total depth from wall to
	front of closed oven door
	including handle is 29-1/2.
	Dimension and installation information are shown in inches.
		All GE ranges are equipped with	Listed by
		an Anti-Tip device. The installation	Underwriters
		of this device is an important,
		required step in the installation	Laboratories

of the range.

Specification Revised 9/06

320825