GE JES1142 Grounding Instructions, Adapter Plugs, Safety, Operating, Tips Consumer Support

Models: JES1142

1 24
Download 24 pages 7.03 Kb
Page 5
Image 5
GROUNDING INSTRUCTIONS

ge.com

GROUNDING INSTRUCTIONS

WARNINGImproper use of the grounding plug can result in a risk of electric shock.

Safety

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current.

This appliance is equipped with a power cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

Consult a qualified electrician or service technician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

If the outlet is a standard 2-prong wall outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

Do not under any circumstances cut or remove the third (ground) prong from the power cord.

We do not recommend using an extension cord with this appliance. If the power cord is too short, have a qualified electrician or service technician install an outlet near the appliance. (See EXTENSION CORDS section.)

For best operation, plug this appliance into its own electrical outlet to prevent flickering of lights, blowing of fuse or tripping of circuit breaker.

Instructions

Operating

ADAPTER PLUGS

Usage situations where appliance’s power cord will be disconnected infrequently.

Instructions

Because of potential safety hazards under certain conditions,

we strongly recommend against the use of an adapter plug.

However, if you still elect to use an adapter, where local codes permit, a TEMPORARY CONNECTION may be made to a properly grounded 2-prong wall receptacle by the use of a UL listed adapter which is available at most local hardware stores.

The larger slot in the adapter must be aligned with the larger slot in the wall receptacle to provide proper polarity in the connection of the power cord.

(Adapter plugs not permitted in Canada)

Align large prongs/slots

 

Ensure proper ground

TEMPORARY

and firm connection

before use.

METHOD

 

Troubleshooting

CAUTION: Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall receptacle is grounded through the house wiring.

You should have the circuit checked by a qualified electrician to make sure the receptacle is properly grounded.

When disconnecting the power cord from the adapter, always hold the adapter with one hand. If this is not done, the adapter ground terminal is very likely to break with repeated use. Should this happen, DO NOT USE the appliance until a proper ground has again been established.

Usage situations where appliance’s power cord will be disconnected frequently.

Do not use an adapter plug in these situations because frequent disconnection of the power cord places undue strain on the adapter and leads to eventual failure of the adapter ground terminal. You should have the 2-prong wall receptacle replaced with a 3-prong (grounding) receptacle by a qualified electrician before using the appliance.

5

Tips

Consumer Support

Page 5
Image 5
GE JES1142 owner manual Grounding Instructions, Adapter Plugs, Safety, Operating, Tips Consumer Support