Using the Sabbath Feature. (on some models)

(Designed for use on the Jewish Sabbath and Holidays)

ge.com

The Sabbath feature can be used for baking/roasting only. It cannot be used for broiling, self-cleaning or Delay Start cooking.

NOTE: The oven light comes on automatically (on some models) when the door is opened and goes off when the door is closed. The bulb may be removed. See the Oven Light Replacement section. On models with a light switch on the control panel, the oven light may be turned on and left on.

Safety Instructions

When the display shows the oven is set in Sabbath. When the display shows ⊃ ⊃ the oven is baking/roasting.

How to Set for Regular Baking/Roasting

NOTE: To understand how the oven control works, practice using regular baking (non-Sabbath) before entering Sabbath mode.

Make sure the clock shows the correct time of day and the oven is off.

Touch and hold both the Bake and Broil Hi/Lo pads, at the same time, until the display shows SF.

Tap the Clock pad until SAb appears in the display.

Touch the Start/On pad and ⊃ will appear in the display.

Touch the Bake pad. No signal will be given.

The preset starting temperature will automatically be set to 350.° Tap the + or pads to increase or decrease the temperature in 25° increments. The temperature can be set between 170° and 550.° No signal or temperature will be given.

Touch the Start/On pad.

After a random delay period of approximately 30 seconds to 1 minute,

⊃ will appear in the display indicating that the oven is baking/roasting. If ⊃ ⊃ doesn’t appear in the display, start again at Step 4.

To adjust the oven temperature, touch the Bake pad and tap the + or pads to increase or decrease the temperature in 25° increments. Touch the Start/On pad.

NOTE: The Clear/Off and Cooking Time pads are active during the Sabbath feature.

Instructions

Operating

Installation

Care and Cleaning

Instructions

How to Set for Timed Baking/Roasting—Immediate Start and Automatic Stop

When the display shows the oven is set in Sabbath. When the display shows ⊃ ⊃ the oven is

NOTE: To understand how the oven control works, practice using regular (non-Sabbath) Immediate Start and Automatic Stop before entering the Sabbath mode.

Make sure the clock shows the correct time of day and the oven is off.

Touch and hold both the Bake and Broil Hi/Lo pads, at the same time, until the display shows SF.

Tap the Clock pad until SAb appears in the display.

Touch the Start/On pad and ⊃ will appear in the display.

Touch the Cooking Time pad.

Touch the + or pads to set the desired length of cooking time between 1 minute and 9 hours and 59 minutes. The cooking time that you entered will be displayed.

Touch the Start/On pad.

Touch the Bake pad. No signal will be given.

The preset starting temperature will automatically be set to 350.° Tap the + or pads to increase or decrease the temperature in 25° increments. The temperature can be set between 170° and 550.° No signal or temperature will be given.

Touch the Start/On pad.

After a random delay period of approximately 30 seconds to 1 minute,

⊃ will appear in the display indicating that the oven is baking/roasting. If ⊃ ⊃ doesn’t appear in the display, start again at Step 7.

To adjust the oven temperature, touch the Bake pad and tap the + or pads to increase or decrease the temperature in 25° increments. Touch the Start/On pad.

When cooking is finished, the display will change from ⊃ ⊃ to ⊃, indicating that the oven has turned OFF but is still set in Sabbath. Remove the cooked food.

Troubleshooting Tips Consumer Support

baking/roasting.

19

Page 19
Image 19
GE JGBP25, JGBP26, JGBP27, JGBP28, JGBP29, JGBP31, JGBP32, JGBP33 manual Using the Sabbath Feature. on some models