GE JKP20BF/CF/WF - GE 27 Built-In Single Oven, GE Appliances, Sealed Burner Gas Cooktop

GE Appliances

JKP20BF/CF/WF – GE 27" Built-In Single Oven

Undercounter Installation Dimensions (in inches)	Sealed Burner Gas Cooktop
Gas or electric cooktops may be installed over this�	Installation Dimensions (in inches)
oven. See cooktop installation instructions for cutout size.�
See label on top of oven for approved cooktop models.

Standard Burner Gas Cooktop Installation Dimensions (in inches)

25

25" MIN.

25 1/4" MAX.

240V / 208V�	Gas or electric connections�
	for gas cooktop must be�
Junction Box�
	located in an adjacent�
Location
	accessible location to the right

5

Allow 1"�

90° Street el

45° Elbow

Cabinet sides

5" To center of 2" diameter� hole from countertop

2" Diameter hole (20-7/8"�

from front of countertop�

to hole center)

90° Street el

45° Elbow

Cabinet sides

3-7/16" To center of 2" diameter� hole from countertop

2" MIN. diameter hole� (23-1/4" from front� surface of countertop)

27 5/8" MIN.

28 1/8" MAX.

unit overlap�	22" MIN. �	36"�
	Above�	Typical�
all edges	Support�	Countertop�
	Platform	Height

Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.

24

3/4" Support�

Platform Required

Must Support 150 Lbs.

Note: Oven is rated for use only under 30" standard or sealed burner gas and selected 30" CleanDesign and Calrod® electric cooktops.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.

Specification Created 7/02

Listed by

Underwriters

RLaboratories

For answers to your Monogram,® GE Profile™ or GE appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

320430