
JKP55SP
GE® 27" Built-In Double Wall Oven
Dimensions and Installation Information
Locate junction box for 24"models
KW Rating
240V |
| 6.8 |
208V |
| 5.1 |
Breaker Size | ||
240V |
| 30 Amps |
| ||
208V |
| 30 Amps |
|
|
|
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.
C | 2" x 4" or |
L | equivalent |
| runners |
Suitable |
|
|
bracing |
|
|
|
| |
to support | 18" | |
runners | Over centerline | |
|
| of cabinet |
| (must support 300 lbs.) |
Locate | 10 |
junction box |
|
for 27"models either 5" MIN. below cutout floor or 44" MIN. above cutout floor
Access
from adjacent
cabinet D required
56" MIN. above cutout floor
Allow 3/4"
A for overlap over all edges of cutout
C
B
G
Note: If marks, blemishes or the cutout opening is visible above the installed oven, it may be necessary to add wood shims under the runners and front trim until the marks or openings are covered.
Note: Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.
Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.
Cabinet | 27" | |
| A – Cabinet width required | 27" min. |
| B – Minimum cabinet depth | |
| C – Opening width | 25" min. - |
| D – Opening height | |
| E – Recommended minimum cutout location from floor | |
| Oven |
|
| F – Overall depth* | |
| G – Overall height with trim | |
| Overall height without trim | 51" |
| H – Overall width |
*Depth including door handle is approximately
E |
| 21 | |
|
| Conduit | |
| 2" X 4" or | ||
Minimum | equiv. runners | F | |
(cutout floor) |
| ||
cutout location | 21" MIN. | ||
| |||
from floor |
| door opening | |
|
| allowance |
Dimension and installation information are shown in inches.
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
Listed by
Underwriters
Laboratories
Specification Created 5/09
320371