GE JKP70BM/WM, GE 27 Built-InSingle Convection Wall Oven, Undercounter Installation Dimensions

JKP70BM/WM

GE® 27" Built-In Single Convection Wall Oven

Dimensions and Installation Information (in inches)

Undercounter Installation Dimensions

Gas or electric cooktops may be installed over this

oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models.

Sealed Burner Gas Cooktop	Standard Burner Gas Cooktop
Installation Dimensions	Installation Dimensions

	240V / 208V
25	Junction Box
	Location

5

25" MIN.

25 1/4" MAX.

Allow 1"

Gas or electric connections for gas cooktop must be located in an adjacent accessible location to the right

22" MIN. 36"

90° Street el

45° Elbow

Cabinet sides

5" To center of 2" diameter hole from countertop

90° Street el 45° Elbow

2" Diameter hole (20-7/8"
from front of countertop
to hole center)	Cabinet sides

3-7/16" To center of 2" diameter hole from countertop

2" MIN. diameter hole (23-1/4" from front surface of countertop)

unit overlap

27 5/8" MIN.all edges

28 1/8" MAX.

Above	Typical
Support	Countertop
Platform	Height

Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.

24

3/4" Support

Platform Required

Note: Oven is rated for use only under 30" standard or sealed burner gas and selected 30" CleanDesign and Calrod® electric cooktops.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.

Must Support 150 Lbs.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Listed by

Underwriters

Laboratories

Specification Revised 10/07 320436