JKP75SM
GE® 27" Built-In Convection/Thermal Wall Oven
Dimensions and Installation Information (in inches)
KW Rating
240V | 6.8 |
208V | 5.1 |
Breaker Size | |
240V | 30 Amps |
208V | 30 Amps |
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.
C | 2" x 4" or |
L | equivalent |
| runners |
Suitable |
|
|
bracing |
|
|
|
| |
to support | 18" | |
runners | Over centerline | |
|
| of cabinet |
| (must support 300 lbs.) |
Locate | 10 |
junction box |
|
for 27"models either 5" MIN. below cutout floor or 44" MIN. above cutout floor
Access
from adjacent
cabinet D required
Locate junction box for 24"models 56" MIN. above cutout floor
Allow 3/4"
A for overlap over all edges of cutout
C
B
G
Note: If marks, blemishes or the cutout opening is visible above the installed oven, it may be necessary to add wood shims under the runners and front trim until
Cabinet | 27" |
A – Cabinet width required | 27" min. |
B – Minimum cabinet depth |
E |
2" X 4" or |
Conduit
21
the marks or openings are covered.
Note: Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.
Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.
| C – Opening width | 25" min. - |
| D – Opening height | |
| E – Recommended minimum cutout location from floor | |
| Oven |
|
| F – Overall depth* | |
| G – Overall height with trim | |
| Overall height without trim | 51" |
| H – Overall width |
*Depth including door handle is approximately
Minimum | equiv. runners | |
(cutout floor) | ||
cutout location | ||
| ||
from floor |
|
F
21" MIN. door opening allowance
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
Listed by
Underwriters
Laboratories
Specification Created 2/07 | 320360 |