Using the clock, timer and control lockout, Tips Care

Instructions

Using the clock, timer and control lockout.

Safety

Make sure the clock is set to the correct time of day.

To Set the Clock

The clock must be set to the correct time of day for the automatic oven timing functions to work properly. The time of day cannot be changed during timed baking.

Press the CLOCK pad.

Press the HOUR and MIN + or – pads to set the time of day.

Press the START pad.

Operating Instructions

The timer is a minute timer only.

The timer does not control oven operations. The maximum setting on the timer is 9 hours and 59 minutes.

To Set the Timer

Press the KITCHEN TIMER

ON/OFF pad.

Press the HOUR and MIN + or

–pads until the amount of

time you want shows in the display.

If you make a mistake, press KITCHEN TIMER ON/OFF and begin again.

Press the START pad.

When the timer reaches :00, the control will beep 3 times followed by one beep every 6 seconds until the KITCHEN TIMER ON/OFF pad is pressed.

The 6 second tone can be canceled by following the steps in the Special features of your oven control section under Tones at the End of a Timed Cycle.

and Cleaning

After pressing the START pad, SET disappears; this tells you the time is counting down, although the display does not change until one minute has passed. Seconds will not be shown in the display until the last minute is counting down.

Tips Care

To Reset the Timer

If the display is still showing the time remaining, you may change it by pressing the KITCHEN TIMER ON/OFF pad, then press the HOUR and MIN + or – pads until the time you want appears in the display.

If the remaining time is not in the display (clock, delay start or cooking time are in the display), recall the remaining time by pressing the KITCHEN TIMER ON/OFF pad and then pressing the HOUR and MIN + or – pads to enter the new time you want.

Troubleshooting

To Cancel the Timer

Press the KITCHEN TIMER ON/OFF pad twice.

Control Lockout

Consumer Support

Your control will allow you to lock out the touch pads so they cannot be activated when pressed.

To lock/unlock the controls:

Press the HOUR and MIN – pads at the same time for 3 seconds until the display shows LOC ON.

To unlock the control, press the HOUR and MIN – pads at the same time for 3 seconds until the display shows LOC OFF.

When this feature is on and the touch pads are pressed, the control will beep and the display will show LOC ON.

■The control lockout mode affects all touch pads. No touch pads will work when this feature is activated.

■The adjustment will be retained in memory after a power failure.

JKS0627 specifications

The GE JKS0627 is a cutting-edge gas turbine developed by General Electric, known for its advanced design and efficiency in power generation. This model represents a significant advancement in turbine technology, catering to the growing energy demands worldwide while emphasizing environmental sustainability.

One of the main features of the GE JKS0627 is its high efficiency rate, which is achieved through the incorporation of state-of-the-art materials and design methodologies. The turbine is capable of operating at higher temperatures and pressures, resulting in improved thermal efficiency. This translates into lower fuel consumption and reduced greenhouse gas emissions, making it an environmentally friendly option for energy producers.

The JKS0627 utilizes advanced aerodynamics in its blade design. The blades are crafted using advanced alloys that withstand extreme conditions, ensuring longevity and reliability. This focus on durable materials minimizes maintenance requirements and increases operational uptime, providing a significant advantage in cost-effectiveness for power plants.

Another key technology integrated into the JKS0627 is its digital twin capabilities. This feature allows for real-time monitoring and analysis of the turbine's performance. By simulating various operational scenarios, engineers can predict failures before they occur, enhance maintenance strategies, and optimize performance. This predictive maintenance capability leads to increased efficiency and lower operational costs.

The GE JKS0627 is also designed with flexibility in mind. It can operate on various types of gaseous and liquid fuels, making it suitable for a wide range of applications, from peaking power plants to baseload generation. This adaptability is particularly important in today’s dynamic energy market, where the demand for different fuel sources can fluctuate.

Additionally, the turbine supports a seamless integration into renewable energy systems. Its ability to ramp up and down quickly complements intermittent renewable sources like wind and solar, providing the necessary backup power to ensure grid stability.

In conclusion, the GE JKS0627 stands out in the turbine market due to its high efficiency, advanced materials, digital twin technology, fuel flexibility, and adaptability to renewable integration. These characteristics make it a formidable contender in the quest for sustainable energy solutions in an ever-evolving global landscape. With its innovative design and reliable performance, the GE JKS0627 is poised to play a crucial role in the future of power generation.

GE JKS0627 Using the clock, timer and control lockout, Tips Care, Cleaning, Troubleshooting

Models: JKS0627