JNM1851DMWW/CC/BB

GE Spacemaker® Over-the-Range Microwave Oven

Dimensions and Installation Information (in inches)

 

Hood Exhaust Duct: Outside ventilation requires a HOOD EXHAUST DUCT. Read the

Optional Accessories (Available at additional cost)

following carefully.

 

Exhaust Connection: The hood exhaust has been designed to mate with a standard

3-1/4" x 10" rectangular duct. If a round duct is required, a rectangular-to-round transition adaptor must be used. Do not use less than a 6" diameter duct

Rear Exhaust: If a rear or horizontal exhaust is to be used, care should be taken to align exhaust with space between studs, or wall should be prepared at the time it is constructed by leaving enough space between the wall studs to accommodate exhaust.

Maximum Duct Length: For satisfactory air movement, the total duct length of

3-1/4" x 10" rectangular or 6" diameter round duct should not exceed 120 equivalent feet.

Elbows, Transitions, Wall and Roof Caps, etc., present additional resistance to airflow and are equivalent to a section of straight duct which is longer than their actual physical size. When calculating the total duct length, add the equivalent length of all transitions and adaptors plus the lengths of all straight duct sections. The chart below shows the approximate feet of equivalent length of some typical ducts.

Duct

Equivalent Feet

A. Rectangular-To-round

 

Transition Adaptor

5 ft.

 

 

B. Wall Cap

40 ft.

 

 

C. 90° Elbow

10 ft.

 

 

D. 45° Elbow

5 ft.

 

 

E. 90° Elbow

25 ft.

 

 

F. 45° Elbow

5 ft.

 

 

G. Roof Cap

24 ft.

For answers to your Monogram,® GE Profileor GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

12" Filler Panel Kits

JX41–Black

JX40WH–White

15" Filler Panel Kits

JX48BL–Black

JX48WH–White

When replacing a 36" or

42" range hood, this kit fills in the additional width to

provide a custom built-in appearance. For installation between cabinets only; not

for end-of-cabinet installation. Each kit contains two 3"-wide filler panels.

Filter KitsJX81– Recirculating Charcoal Filter KitTo be used when the Spacemaker microwave oven cannot be vented to the outside.

Listed by

Underwriters

Laboratories

Specification Revised 8/07

340138

Page 2
Image 2
GE JNM1851DMBB, JNM1851DMCC, JNM1851DMWW Following carefully, Duct Equivalent Feet, When replacing a 36 or

JNM1851DMBB, JNM1851DMWW, JNM1851DMCC specifications

The GE JNM1851DMCC, JNM1851DMWW, and JNM1851DMBB models represent a line of sleek and efficient over-the-range microwaves that combine advanced technology with user-friendly features. These microwave ovens are designed for versatility and convenience, making them an ideal choice for modern kitchens.

One of the main features of these GE microwave models is their capacity. With a spacious interior, they can accommodate a variety of dishes, allowing users to efficiently reheat leftovers or prepare meals from scratch. The 1.8 cubic feet capacity provides ample space, making it suitable for families and those with busy lifestyles.

The JNM1851 series is equipped with a powerful 1000 watts of cooking power, ensuring that food is cooked evenly and quickly. The use of advanced inverter technology allows for consistent heating, preventing the common issue of food being hot on the outside but cold on the inside. This technology also contributes to a more efficient energy use, making these microwaves both effective and environmentally friendly.

An intuitive control panel enhances user experience, featuring easy-to-read buttons and a digital display that indicates cooking times and settings. Additionally, pre-programmed cooking settings allow for one-touch cooking for various food items, simplifying meal preparation.

The interior of these microwaves is designed with convenience in mind. The easy-clean interior helps to minimize the hassle of cleaning, allowing users to maintain a hygienic cooking environment effortlessly. Furthermore, the bright interior lighting aids visibility when checking on dishes.

The design is another significant aspect of the JNM1851 series. Available in three stylish finishes—stainless steel, white, and black—these microwaves can seamlessly integrate into any kitchen decor. The sleek exterior not only adds to the aesthetic appeal but also offers a streamline look that contributes to the overall modern design of the kitchen.

Ventilation is a key feature in the JNM1851 models. They come with a two-speed venting system that efficiently removes smoke and odors from the kitchen, making it suitable for installation over the range. This dual functionality enhances kitchen air quality while saving space, providing a perfect solution for smaller cooking areas.

In summary, the GE JNM1851DMCC, JNM1851DMWW, and JNM1851DMBB models excel in capacity, power, and ease of use. With advanced features like inverter technology, easy-clean interiors, and stylish designs, these microwaves stand out as reliable kitchen appliances that cater to a range of cooking needs and preferences.