TM
JP969BH/CH/SH/WH – GE Profile™ 36" Built-In CleanDesign Cooktop
Cabinet Installation Dimensions (in inches)
| 36"** | |
|
| |
13" MAX. | Cooktop | |
depth |
| |
|
|
KW Rating
240V | 8.6 |
208V | 6.5 |
Breaker Size | |
240V | 36 Amps† |
208V | 31 Amps† |
30" MIN. to
unprotected
cabinet 18" MIN. to cabinet
side wall
from
Electrical junction box 16" MIN. below countertop
clearance to33-7/8"side wall
from
**Depth of unit at conduit connection location (rear) is
Cut should not interfere with cabinet structure at front
†Note: Check local codes for required breaker size.
Requires a 5" free area between the bottom of the cooktop to any combustible material, i.e., shelving. Free area not required when installing wall oven underneath cooktop. Refer to installation instructions. Requires an 18" minimum from cooktop to adjacent overhead cabinets. Units are furnished with a 48" flexible armored cable.
36" Ribbon cooktops are approved for use over GE 30" Single Wall Ovens and warming drawers. Refer to cooktop and wall oven installation instructions packed with product for current dimensional data.
Notes: If installing with a GE Profile Telescopic Downdraft System, consult both cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/electric supply may need to be
The countertop must be at least 26" deep with a flat surface area of
Note: Consult cabinet and countertop manufacturer’s specs for flush mount installation prior to install.
Flush Mount Installation Kit
Accommodates both 30" and 36" installations. Not for use with stainless steel models. JXFLMBB (Black— use with black glass cooktops with a white, bisque or black pattern)
Installation Information:
Before installing, consult installation instructions packed with product for current dimensional data.
R
Specification Created 1/03
Listed by Underwriters Laboratories
For answers to your Monogram,® GE Profile™ or GE appliance questions, visit our website at GEAppliances.com or call
GE Answer Center® service, 800.626.2000.