TM
JT915BF/CF/SF/WF – GE Profile™ 30"
Optional Undercounter Installation with 36" Gas Cooktop (in inches)
Optional Undercounter Installation With
30" CleanDesign or Sealed Burner Gas Cooktop (in inches)
30"
4" To
| 2 (two) 90° elbows & | |
| sufficient pipe to | |
| connect in adjacent | |
| cabinet | |
Conduit | Junction box | |
(48" long) | ||
| for oven | |
1/2" Black | Junction box in | |
iron pipe | adjacent cabinet | |
Pressure | for counter unit | |
regulator | 22 | |
Union |
| |
Power cord | ||
for counter unit | ||
valve | ||
| ||
3/4" Support |
| |
Right cabinet side |
|
Free space
with typical 36" countertop
height
Side View
Power cord |
Junction box(s) for |
oven & radiant |
cooktop 22" from |
floor |
36" Typical |
Countertop height |
22 |
Reference |
This installation is to achieve minimum gap between bottom of countertop and control panel.
Note: For this installation, the bottom trim will not be flush with a typical 4" toe kick.
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a
Side View
194°F temperature rating.
Undercounter Installation (in inches)
25
Top and/or side fillers may be necessary if unit is positioned between existing cabinets
Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models.
| Junction box | Gas |
| Gas (including the pressure regulator) and | ||
|
| electrical connections for gas cooktop must | ||||
| location | connection | be located in an adjacent accessible location | |||
| 240/208V | 5 |
| to the right. For a 36" gas cooktop, the | ||
|
|
| connections may be made to the left. | |||
|
|
|
| |||
|
|
| 120 Volt |
| ||
Cutout depth |
|
|
| Outlet | ||
|
|
|
|
| Countertop | |
|
|
|
|
| ||
Allow 11/16'' |
|
|
| |||
22'' MIN. above |
| |||||
overlap over side |
| |||||
support platform | 36'' MIN. | |||||
edges of cutout | ||||||
Cutout height |
|
|
| |||
|
|
|
|
| ||
|
|
|
| 24 |
|
Note: 36" ribbon cooktops (excluding JP968) are approved for use over GE 30" single wall ovens only. 30" ribbon cooktops (excluding JP938) are approved for use over GE 30" and
GE 27" single wall ovens. Model JP938 can be installed over 27" wall ovens except stainless model JK915 and JK912SF. Refer to cooktop and wall oven installation information packed
Listed by
Underwriters
RLaboratories
For answers to your Monogram,® GE Profile™ or
3/4'' Support platform required
Match toe kick height
front and two sides
4'' To
with products for current dimensional data.
Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.
GE appliance questions, visit our website at GEAppliances.com or call
GE Answer Center® service, 800.626.2000.
Specification Created 7/02