GE JTP28SK dimensions Amps, Overlap of Oven Over Side Edges of Cutout 11/16-3/4, 23-1/2, 29-3/4

JTP28SK

GE® 30" Built-In Double Oven

Dimensions and Installation Information (in inches)

KW Rating
240V	8.8
208V	6.6
Breaker Size
240V	40 Amps
208V	30 Amps
		30"
Cabinet
A - Overlap of Oven Over Side Edges of Cutout		11/16"-3/4"
B - Overlap of Oven at Bottom of Cutout		1"
Oven
C - Overall Depth		23-1/2"
D - Overall Height		52-7/8"
E - Overall Width		29-3/4"
Note: Cabinets installed adjacent to wall ovens must have an adhesion
spec of at least a 194°F temperature rating. Electric wall ovens are not
approved for installation with a plug and receptacle. They must be
hard wired in accordance with installation instructions. Suitable oven
cabinet bracing must support 275 lbs.
Installation Information: Before installing, consult installation instructions
packed with product for current dimensional data.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

	Cutout width
	28-1/2'' MIN.	5
	28-5/8'' MAX.
			Cutout depth
			23-1/2" MIN
E			Junction box
	A		location
	B
	Conduit
	(48-1/2"
	long)		47" to
			bottom of
		Cutout height	junction box
		51-13/16" MIN.

D51-15/16" MAX.

A

	21
21" minimum	B
Door Opening		Minimum cutout location
Allowance
	C	12" from the floor.
	Cabinet
	width 30"
MOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.
THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.

C
L	2 x 4 or
	equivalent
	runners

Suitable
bracing	18"
to support
runners	over centerline
	of cabinet
	(Must Support 275 LBS.)

All GE ranges are equipped with	Listed by
an Anti-Tip device. The installation
of this device is an important,	Underwriters
required step in the installation	Laboratories
of the range.	R

Specification Created 7/05 320133