GE JTP35SM dimensions GE 30 Built-In Double Wall Oven

JTP35SM

GE® 30" Built-In Double Wall Oven

Dimensions and Installation Information (in inches)

KW Rating
240V	6.9
208V	5.2	C
		L	2 x 4 or
Breaker Size			equivalent
			runners

Cutout width

28-1/2'' MIN. 5 28-5/8'' MAX.

Cutout depth 23-1/2" MIN

240V	30 Amps
208V	30 Amps
Note: Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F		Suitable
temperature rating. Electric wall ovens are		bracing	21-5/8"
		to support
				over centerline
not approved for installation with a plug		runners
					of cabinet
and receptacle. They must be hard wired in			(must support 325 lbs.)
accordance with installation instructions.
Suitable oven cabinet bracing must		n Cabinet				30"
support 275 lbs.		A – Overlap of oven over side of edges of cutout				11/16"-3/4"
Door handle protrudes 3" from door face.		B – Overlap of oven at top and bottom of cutout				1"
		Oven
Cabinets and drawers on adjacent 45° and 90°		C – Overall depth*				23-1/2"
		D – Overall height with trim				53-3/8"
walls should be placed to avoid interference with
		Overall height without trim				52-7/8"

E

A

Conduit (72" long)

D

21

21" minimum Door Opening Allowance

C

	Junction box
	location
B
	47" to
	bottom of
Cutout height	junction box
51-13/16" MIN.
51-15/16" MAX.
A

B

Minimum cutout location 12" from the floor.

the handle.	E –Overall width	29-3/4"
Installation Information: Before installing,	*Depth including door handle is approximately 26-6/10" min. to
	26-9/10" max.

consult installation instructions packed with product for current dimensional data.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Cabinet width 30"

MOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.

THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.

All GE ranges are equipped with	Listed by
an Anti-Tip device. The installation
of this device is an important,	Underwriters
required step in the installation	Laboratories
of the range.

Specification Revised 9/07 320146