23
Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support
ge.com
Lower Oven Control, Clock and Timer Features and Settings
Display
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or
self-cleaning mode and the times set for
the timer or automatic oven operations.
NOTE: The time on the lower oven display is
shown in hours and minutes (1:30 is one hour,
30 minutes). On the microwave oven, time is
shown in minutes and seconds (1:30 is one
minute, 30 seconds).
If “F– and a number or letter” flash in the
display and the oven control signals, this
indicates a function error code. Press the
CLEAR/OFF pad. Allow the oven to cool for one
hour. Put the oven back into operation. If the
function error code repeats, disconnect the power
to the oven and call for service.
If your oven was set for a timed oven
operation and a power outage occurred, the
clock and all programmed functions must be reset.
The time of day (may be incorrect) will flash
in the display when the there has been a
power outage.
BROIL HI/LO Pad
Press to select the broil function.
BAKE Pad
Press to select the bake function.
SELF CLEAN Pad
Press to select the self-cleaning function.
See the Using the self-cleaning lower oven
section.
OVEN LIGHT Pad
Press to turn the oven light on or off.
Number Pads
Use to set any function requiring
numbers such as the time of day on the
clock, the timer, the oven temperature,
the start time and length of operation for
timed baking and self-cleaning.
CLEAR/OFF Pad
Press to cancel ALL oven operations
except the clock and timer.
START Pad
Must be pressed to start any cooking or
cleaning function.
KITCHEN TIMER ON/OFF Pad
Press to select the timer feature.
DELAY START Pad
Use along with COOKING TIME or SELF
CLEAN pads to set the oven to start and
stop automatically at a time you set.
COOKING TIME Pad
Press and then press the number pads
to set the amount of time you want your
food to cook. The oven will shut off
automatically when the cooking time
has run out, unless the Cook and Hold
feature was set.
CLOCK Pad
Press before setting the clock.