GE JTS10DP, JKS10DPBB dimensions Undercounter Installation Dimensions, Sealed Burner Gas Cooktop

JKS10DP

GE® 27" Built-In Single Wall Oven

Undercounter Installation Dimensions

Gas or electric cooktops may be installed over this

oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models.

Sealed Burner Gas Cooktop	Standard Burner Gas Cooktop
Installation Dimensions	Installation Dimensions

25

25" MIN.

25 1/4" MAX.

240V / 208V	Gas or electric connections
	for gas cooktop must be
Junction Box
	located in an adjacent
Location
	accessible location to the right

5

Allow 1" 22" MIN. 36"

90° Street el

45° Elbow

Cabinet sides

5" To center of 2" diameter hole from countertop

	90° Street el
2" Diameter hole (20-7/8"	45° Elbow
from front of countertop
to hole center)	Cabinet sides

3-7/16" To center of 2" diameter hole from countertop

2" MIN. diameter hole (23-1/4" from front surface of countertop)

27 5/8" MIN.

28 1/8" MAX.

unit overlap	Above	Typical
all edges	Support	Countertop
	Platform	Height

Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.

24

3/4" Support

Platform Required

Must Support 150 Lbs.

Note: Oven is rated for use only under 30" standard or sealed burner gas and selected 30" CleanDesign and Calrod® electric cooktops.

Installation Information: Before installing, consult installation instructions packed with product for ­current dimensional data.

Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range.

Listed by Underwriters Laboratories

Specification Created 5/09 320433