35
If the model is not vented
to the outside, the air will
be recirculated through a
disposable charcoal filter
that helps remove smoke
and odors.
The charcoal filter should
be replaced when it is
noticeably dirty or
discolored (usually after
6–12 months, depending
on hood usage). See
“Optional Kits,” page 9,
for more information.

The charcoal filter

cannot be cleaned. It

must be replaced. Order

Part No. WB02X10943

from your GE supplier.

Charcoal Filter (on some models)
To remove the charcoal
filter, disconnect power
at the main fuse or circuit
breaker panel or pull
the plug.
Remove the top grille by
removing the 2 screws that
hold it in place. Pull the
filter at the bottom until it
comes free of the locking
tabs. Slide the filter down
and out.
To Remove
Charcoal Filter
Remove 2 grille screws
to remove the grille.
To install a new filter,
remove plastic and other
outer wrapping from the
new filter.
1
Insert the top of the filter
up and into the grooves
on the inside of the top
opening.
2
Push the bottom of the
filter in until it snaps
into place behind the
locking tabs.
To Install
Charcoal Filter