GE PDW 8700 manual Flashing display lights, Recommended dishwasher products, 6Clean, What It Means

ge.com

6Clean

PDW8700 Series and PDW8800 Series

The CLEAN light is illuminated when the selected cycle and enhancements are complete. The light will stay ON until a pad is pressed or the door is opened and then closed.

PDW9200 Series and PDW9800 Series

The CLEAN light is illuminated and a double beep will sound when the selected cycle and enhancements are complete. You may remove the dishes at any time. Note the high-efficiency fan will run quietly for 30 minutes to 4 hours (depending on selected cycle) after the CLEAN light is illuminated to continue drying the dishes. The fan can be turned off by opening the door and pressing any keypad.

NOTE: To turn off the audible end-of-cycle signal (or re-activate it if it was previously disengaged), press the HEATED DRY pad 5 times within 3 seconds. A triple beep will sound to indicate the end-of-cycle beep option has been toggled.

Flashing display lights.

Status Indicator Lights	What It Means
START/RESET	Cycle has been interrupted by pressing the START/RESET pad. Light will quit
	flashing after the dishwasher automatically drains out the water.

Recommended dishwasher products.

Safety Instructions

Operating Instructions

GE recommends the following products for use in its dishwashers:

■Cascade® and Electrasol® powder, liquid or gel automatic dishwasher detergents.

■Jet Dry® and Cascade Crystal Clear® to remove spots and prevent new film buildup on your dishes, glasses, flatware, cookware and plastic.

■Cascade® Plastic Booster™ to remove red staining inside your dishwasher that can come from some tomato-based stains.

■Cerama Bryte® Stainless Steel Appliance Cleaner to clean the stainless steel panel of GE and Profile™ stainless exterior dishwashers.

■Jet Dry® Dishwasher Cleaner to help remove some hard water mineral stains that can occur in hard water conditions.

Troubleshooting Tips

Consumer Support

7