GE PGP989DN/TN dimensions

Dimensions and Installation Information

For answers to your Monogram,® GE Profile™ or

GE® appliance questions, visit our website at

ge.com or call GE Answer Center® service,

800.626.2000.

Listed by

Underwriters

Laboratories

Specification Revised 4/09

230284

*Note: A 5" minimum spacing to adjacent side wall is required

Dimension and installation information are shown in inches.

Wall Installation: Wall installations require 25”

countertop

depth. When cabinet is flush against

the wall, the fan housing can be rotated to the

horizontal position for direct venting through

rear wall. Make a countertop cutout in the

range cabinet according to unit dimensions

and installation type. Duct hole is positioned in

back of cabinet for through-the-wall ducting.

Requires special offset adapter JXRW89.

Peninsula or Island Installation: For peninsula/

islands a minimum 26”

countertop

depth is suggested.

Blower should be in vertical p osition. Island or

peninsula cabinets may require adjustment in cutout

depth and/or location within the width dimensions.

Duct hole is positioned in bottom of cabinet for island

or peninsula installation.

Slab Installation: For peninsula or island installation

and rear wall ducting, 6” PVC duct or locally

approved piping should be used if installing under

a poured concrete slab.

Installation Information: Before installing, consult

installation instructions, packed with product, for

current dimensional data.

Note: These cooktops are approved for indoor use only.

Long

10-1/2

Cabinet Dimensions (in inches)

227⁄16ʺ

(229⁄16ʺ SS)

201⁄2ʺ

22ʺ

297⁄8ʺ

(30ʺ SS)

23⁄16ʺ

(21⁄4ʺ SS)

283⁄4ʺ

25 1-7/8"

MIN. Required*

20-5/8

Cut-out Dimensions (in inches)

28-7/8

*U.L. Requirement.

Note: A 5" minimum spacing to adjacent side wall is required

PGP989DN/TN

GE Profile™ 30" Downdraft Gas Cooktop