GE PGS975WEM installation instructions PGS975BEM/WEM, GE Profile 30 Slide-In Gas Range

PGS975BEM/WEM

GE Profile™ 30" Slide-In Gas Range

Dimensions and Installation Information (in inches)

You must use the rear filler strip kit shipped with the range or the optional accessory backguard when installing these ranges

Note: Cabinets installed adjacent to slide-in ranges must have an adhesion spec of at least 194° temperature rating.

Optional Kits for Slide-In Gas Ranges:

(Available at additional cost)

Lower/Side Trim Kits

JXS56WW - Lower Trim Kit (White)

JXS56BB - Lower Trim Kit (Black)

Accessory Backguards

JXS32BB - Black Accessory Backguard

JXS37BB - Black Glass Accessory Backguard

JXS32WW - White Accessory Backguard

JXS37WW - White Glass Accessory Backguard

Installation Information: Before installing, consult

installation instructions packed with product for

2-7/8"

To Front

Surface Of

Countertop

			Accessory
			Backguard
24	31-1/4	30	A*
			2"
			(Grates)
20-5/8"			36
Door Clearance
From Front
Surface of			35-7/8"–38"
Countertop
			from floor to
			countertop
	27-1/2**
	(excluding handle)
			*A – JXS37 is 5-1/4" and JXS32 is 4"
	44-3/4		**Total depth from wall to
			front of closed oven door

including handle is 30-1/2.

		Shave Raised Edge To Clear
30" Min.		31-1/8 Wide Control Panel
B		9/16
	30" Min. to
	unprotected
	cabinet from
23-3/16	countertop	13" Max.
		18" Min.
Max. depth of
cord, plug,		25
receptacle box
& gas hookup		Acceptable
3-1/2" to prevent		Gas Line &
interference		Electrical
with drawer		Outlet Area
3		7
15	12
29-15/16" Min.
30-1/16" Max.

B is 9-1/2" from walls on either side for P2S975, PGS975 and PGS908 and 6” for PGS968

current dimensional data.

Counter Cutout Dimensions (in inches)

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

If you are NOT using the		If you are using the
Filler strip or Backguard:		Filler strip or Backguard:
			25
	23-3/16
	30			30

All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range.

Specification Revised 5/07 230142