GE PHB925SPSS dimensions GE Profile 30 Free-StandingElectric Range, Acceptable electrical, 240V

PHB925SP

GE Profile™ 30" Free-Standing Electric Range

Dimensions and Installation Information (in inches)

KW Rating

240V	14.2
208V	10.7

Breaker Size

40 Amps†

†Note: Check local codes for required breaker size.

Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor connection to an electric range.

Receptacle Locations

Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall.

Note: 30" ranges conform to U.L. requirements for 0" spacing from ­adjacent

	30
	2-1/2
	25
Acceptable electrical	2-1/2
outlet area
	7
	14-1/2
29-7/8	7-1/2
	A*

walls below countertops. To reduce possibility­ of scorching walls, engineering recommends a minimum of 1-1/2" spacing to allow for possible extended, high- heat, no-load heating element operation.

Installation Information: Before installing, consult installation instructions packed with product for ­current dimensional data.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

25-3/8

47-5/8

All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range.

On models with baking or warming drawers, electrical outlet must not be in this area.

Dimension from wall to front of closed oven door handle is 27-3/8 on models PB750, PB900, PB910, PB920, PB969 and PHB925 and 27-3/4 on models JBP89/84/81.

*A is 46-7/8 on models JBP89/84/81 and 46-1/2 on models PB750, PB900, PB910, PB920, PB969 and PHB925

Listed by

Underwriters

Laboratories

Specification Revised 6/09 221026