PP989SN
GE Profile™ 30" Downdraft Electric Cooktop
Dimensions and Installation Information
KW Rating | Wall Installation: Wall installations | ||
require 25” countertop depth. When | |||
|
| ||
240V | 9.1 | ||
cabinet is flush against the wall, the | |||
208V | 6.9 | fan housing can be rotated to the | |
|
| horizontal position for direct venting | |
|
| ||
through rear wall. Make a countertop cutout in the range cabinet according to unit dimensions and installation type. Duct hole is positioned in back of cabinet for
Peninsula or Island Installation: For peninsula/islands a minimum 26” countertop depth is suggested. Blower should be in vertical position. Island or peninsula cabinets may require adjustment in cutout depth and/or location within the width dimensions. Duct hole is positioned in bottom of
227⁄16ʺ
(229⁄16ʺ SS) 
22ʺ
201⁄2ʺ 
297⁄8ʺ
(30ʺ SS)
283⁄4ʺ
23⁄16ʺ
(21⁄4ʺ SS)
cabinet for island or peninsula installation.
Slab Installation: For peninsula or island installation and rear wall ducting, 6” PVC duct or locally approved piping should be used if installing under a poured concrete slab.
Receptacle Location: Install an approved junction box within shaded area shown in diagram. Junction box must be at least
Installation Information: Before installing, consult installation instructions, packed with product, for current dimensional data. Note: Electrical cable is not supplied with unit.
These cooktops are approved for indoor use only.
25
*U.L. Requirement.
16
MIN. Required*
9
C
L 4
20
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
*Note: A 6" minimum spacing to adjacent side wall is required Dimension and installation information are shown in inches.
Listed by
Underwriters
Laboratories
Specification Created 7/08
220978
