GE PS900DPCC dimensions GE Profile 30 Slide-In Electric Range, KW Rating, 240V, 11.6, 208V, Amps

PS900DP

GE Profile™ 30" Slide-In Electric Range

Dimensions and Installation Information (in inches)

		Note: Cabinets installed adjacent to slide-in ranges must have an adhesion
KW Rating
		spec of at least 194° temperature rating.
240V	11.6	Note: To reduce the possibility of scorching the side walls above the countertop
208V	8.7	when no load is present on burners, it is recommended that a minimum 6"
		spacing from adjacent side wall be allowed for possible extended high-heat
Breaker Size
		element operation.
240V	40 Amps	Receptacle Locations: For all 30" Slide-In Ranges locally approved flexible
208V	40 Amps	service cord or conduit must be used because terminals are not accessible
		after range installation. See shaded area in drawing for location of electrical
outlet box. Recommended outlet locations allow range to be installed directly against rear wall.

24

2-7/8" To Front

Surface Of

Countertop

20-5/8" Door

Clearance

From Front

Surface of

Countertop

Accessory

Backguard

31-1/4 30 A/B*

36-1/4

Optional Kits For Slide-In Electric Ranges

(Available At Additional Cost)

Accessory Backguards (Attaches to the back of range as a backguard when unit is

Body Sides

(Slide-in ranges are sold without sides installed. Can be installed on either left or right when unit has one exposed side [no cabinet

Optional Lower Trim Kits

(If counter height is greater than 36.5", a lower trim kit is recommended to extend the useful height to 38" maximum)

25-3/4**	*JXS37 is 5-
(excluding handle)	**Total depth f

front of clos including ha

installed in 30" free-standing cutout)

JXS32SS (Stainless) - 4" High JXS32WW (White) - 4" High

adjacent]. Kit contains 1 body side) JXS77WW (White) JXS77BB (Black)

JXS56WW – White JXS56BB – Black

If you are NOT using the Filler strip or Backguard:

Recommended

6" Min.

From Walls

30" Min.

Shave Raised Edge To Clear 31-1/8" Wide Control Panel

Excluding Models JSS28 and JSP39

9/16

JXS32BB (Black) - 4" High

JXS37WW (White) - 5-1/4" High

JXS37CC (Bisque) - 5-1/4" High

JXS37BB (Black) - 5-1/4" High

Rear Filler Strip

WB07T10680 - Black Filler Strip Assembly

WB07T10681 - White Filler Strip Assembly

WB07T10682 - Bisque Filler Strip Assembly

23-3/16

30

If you are using the Filler strip or Backguard:

25

23-3/16

30" Min.

Acceptable
Electrical	13" Max.
Outlet Area	15" Min.

25

Installation information: Before installing, consult installation instructions packed with product for current dimensional data.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

30

35-7/8"–38"
from floor to
countertop	2-1/2
	30

All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range.

7-1/2

2-1/2

Listed by Underwriters Laboratories

Specification Created 5/09 220437