GE PSH25PST dimensions Cabinet

PSH25PST

GE Profile CustomStyle™ ENERGY STAR® 24.6 Cu. Ft. Side-By-Side Refrigerator with Dispenser

Rough-In Dimensions and Installation Information (in inches) Installation Tips to Maximize the Built-In Look

•All wall/floor molding should be removed prior to installation.

•Water recess on rear wall recommended to prevent water line damage. 48" minimum length, 1/4" diameter water line tubing recommended.

•When possible, recess both copper water line and electrical outlet. (See local codes)

•Front and rear leveling legs are adjustable for the built-in look. (See owner’s manual)

**The rough-in dimensions of 70-1/4"/72-1/4" are minimum and measured from the finished floor to top of opening (or the underside of the overhead cabinets). For Models with Trim Kit:

If frameless style cabinets are planned for above the refrigerator, you may need to consider adding a maximum of 1/4" (70-1/2") to height of opening for 23 cu. ft. models and 1/8" (72-3/8") for

25 cu. ft. models to allow for additional clearance between the cabinet doors and the top of refrigerator trim when the cabinet doors are in open position.

24" Cabinet

Water	Electrical
	12"
	Soffit

3/4" Airspace

(1/2" Gap + 1/4"

Wall Plates)

25"

Counter

Top

8' Ceiling

70-1/4"*

23 cu. ft. models

72-1/4"*

25 cu. ft. models

13" to 14" Cabinet

24-1/2"

36-1/8"

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Listed by

Underwriters

Laboratories

R

As an ENERGY STAR® partner, GE has determined

Rthat this product meets the ENERGY STAR guidelines for energy efficiency.

Specification Created 12/05 210225