TM
PSI23MGP – GE Profile Arctica™ 22.7 Cu. Ft. CustomStyle™
Collar Trim Installation
An enclosure is required to match up to the trim, see Typical Installation. To obtain the most integrated look, the cabinet or soffit above the refrigerator should extend out to the same depth as the side panels. The refrigerator opening must have minimum dimensions of
1/2" minimum
3/4" Cabinet
RefrigeratorSide Panel
Case
1/2" Cabinet
Side Panel
Magnetic
Tape
Door Gasket | Side Trim |
Side trim must be installed flush with the gasket contact surface on the case.
Typical Installation
Shaded areas represent front surfaces of
side panels and overhead cabinet or soffit that contacts trim.
Specification Created 2/03
70-1/4"*
*The
Total volume and shelf |
|
|
|
|
area are calculated by the |
| Listed by |
|
|
Association of Home |
| Underwriters |
| R |
|
|
| ||
Appliance Manufacturers’ | R | Laboratories |
|
|
standards. |
|
|
|
|
Cabinet
Overhead Door
Cabinet
1"
Case
Top Trim
IMPORTANT: Before finalizing specifications for your GE Profile CustomStyle Refrigerator, please NOTE:
•A minimum of
•Be sure to allow for 1/2" or 3/4" side panels in addition to the
For answers to your Monogram,® GE Profile™ or GE appliance questions, visit our website at GEAppliances.com or call