GE PT925DNBB dimensions

PT925DN

GE Profile™ 30" Built-In Single/Double Convection Wall Oven

Dimensions and Installation Information (in inches)

KW Rating

240V	3.9
208V	2.9
Breaker Size
240V	20 Amps
208V	20 Amps

Most 30” Wall Cabinets can be used with this unit.

Note: These ovens are not approved for stackable installations. Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.

Suitable bracing to support runners

C

L

21-5/8"

over centerline of cabinet

(must support 275 lbs.)

2 x 4 or equivalent runners

Allow 11/16”

(1.75 cm) for overlap of oven over side edges of cutout

Cutout	9 1/2”
	(12.7 cm)		Junction Box
Width	Max.
28 1/2”			Location
(72.4 cm)			(junction box
Min.			may be
28 5/8”			located in
(72.7 cm)			adjacent
Max.			cabinet)
Opening	Cutout
Between
	Height	22” (55.9 cm)
Inside Walls
	27 1/4”
Must Be	(69.2 cm) Min.		Min. to
At Least	27 5/16”		Bottom of
		Junction Box
28 1/2”	(69.4 cm) Max.
(72.4 cm)

Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.

15”

(38.1 cm)

Wide

Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.

Installation Information: Before installing, consult installation instructions packed with product for ­current dimensional data.

Side-by-side installations require at least 2" between cutouts.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Allow a minimum of 15” (38.1 cm) for clearance to adjacent corners, drawers, . walls, etc. when door is open

		Recommended
Allow 1” (2.5 cm)		cutout
minimum for		location from
overlap of oven		floor 26 1/2”
top and 1 1/4”		(67.3 cm) max
(3.2 cm) overlap
of oven bottom
	of cutout
	Cabinet
	Width
	30”
	(76.2 cm)

Listed by

Underwriters

Laboratories

Specification Revised 4/09

220244