GE PTD915SMSS dimensions GE Profile 30 Warming Drawer, Warming Drawer Dimensions, From Floor

PTD915SM

GE Profile™ 30" Warming Drawer Under Oven Installation

Dimensions and Installation Information (in inches)

23-1/2" min.

KW Rating

120V	.45
Breaker Size
120V	15 Amps

Optional Accessories: JXPN2 – Optional Pan Set Accessory for Warming Drawer. Two commercial pans with lids (4” deep) ZXD30B –1/4” panel kit capability

Warming Drawer Dimensions

	23-1/2" Min.
Locate	Inside
electrical
outlet in
adjacent
cabinet
16" from
left side

Oven

cutout

2x2 or 2x4

anti-tip block

2" min.

Undercounter Installation: A solid barrier must be installed at least 1” from the lowest point of the bottom of cooktop burner box to the top of the cutout. Use any solid material such as 1/4”-thick plywood. Allow at least 1/4” air gap between the barrier and the top of the warming drawer. See label on top of the warming drawer for approved cooktop models.

Under Oven Installation: Additional clearance between cutouts may be required. Check to be

or 42"	28-1/2
from right
side.
	9-1/4
24"		10-1/2
recommended
from floor
for under
countertop
installation

23-1/4

30

against rear	9
wall 9" from	9-1/
		4
floor to bottom

of block

28-1/2

1" Min. above toekick or adjust to oven installation height

Allow 5/8"

overlap on 23-1/4all sides

10-1/2

30

sure that oven supports above the warming

Undercounter Installation

drawer location do not obstruct the required interior 23-1/2” depth and 9-1/4” height.

Door handle protrudes 2-3/4” from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with

Install

2x4 or 2x2

Anti-Tip

	Electrical outlet
Install 2x4 or 2x2	flush with side of
anti-tip block against	cabinet 7" max.

rear cabinet wall 9" from floor to bottom of block

Electrical outlet
42" max. from
right side		25
7	Install a solid barrier
	below a cooktop
	(see note).

1-1/2" Cabinet top

the handle.

Installation Information: Before installing, consult

installation instructions packed with product for ­current dimensional data.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at

9			Block 9"
			From Floor
			to Bottom
		2x4 or 2x2
			of Block
	runners or solid
		bottom

	9		1" Min.*
Electrical		28-1/2	9-1/4
outlet 16" max.
from left side		Solid barrier

1/4" Air gap

36" Countertop height

ge.com or call GE Answer Center® service, 800.626.2000.

23-1/2 min.

Install a solid barrier and a 1/4" min. air gap

above warming drawer.Listed by Underwriters Laboratories

Specification Created 1/07 221130