GE PTI22MBM dimensions Case Dimensions in inches/cm, Clearances, Handle Side Clearance

TM

PTI22MBM - GE Profile™ 21.9 Cu. Ft. CustomStyle™ Top-Freezer Refrigerator

Case Dimensions (in inches/cm.)

68-3/4

69-7/8

36-5/8

35-3/4

23-3/4

26-3/4

Top View

28-3/8

61

Clearances

Handle Side Clearance

–At least 2" (51 mm) on the handle side for fingertip clearances.

Top and Bottom Clearance

–At least 3/16" (4.75 mm) at the top and bottom edges to allow for trim flange.

Hinge Side Clearance

•A 3/4” (19 mm) thick door panel may strike thje adjacent countertops when the door is fully opened. Therefore, the hinge side clearance to raised panel will vary according to installation situation.

–Allow 1-3/4” (44 mm) clearance when installation does not include side panels.

–The installation of 3/4" (19 mm) thick side panels requires less clearance because the space between the door and adjacent countertop is wider.

•To avoid door contact to countertop consider:

–Miter the corner of the adjacent countertops 45°, or

–pull the refrigerator forward enough to avoid contact.

IMPORTANT: Before finalizing specifications for your GE Profile Performance™ CustomStyle™ Refrigerator, Please NOTE:

•A minimum of 36" is required for refrigerator installation

•Be sure to allow for 1/2" or 3/4" side panels in addition to the 36" minimum

Front View

For answers to your Monogram,® GE Profile™ or

GE appliance questions, visit our website at

WWW.GEAppliance.com or call

GE Answer Center® service, 800.626.2000.

Specification Created 12/00

VOLUME and

SHELF AREA

Manufacturer Certified to

ASSOCIATION OF HOME

APPLIANCE MANUFACTURERS

ANSI/AHAN HRF-1-1979

Total volume and shelf area are calculated by the Association of Home Appliance Manufacturers’ standards.

Listed by

Underwriters

RLaboratories