GE PVM2070SMSS dimensions GE Profile Spacemaker 2.0 Cu. Ft. Over-the-Range Microwave Oven, Duct

Models: PVM2070SMSS

1 3
Download 3 pages 28.61 Kb
Page 2
Image 2
Optional Accessories (Available at additional cost)

PVM2070SM

GE ProfileSpacemaker® 2.0 Cu. Ft. Over-the-Range Microwave Oven

Optional Accessories (Available at additional cost)

Hood Exhaust Duct: Outside ventilation requires a HOOD EXHAUST DUCT. Read the following carefully.

Exhaust Connection: The hood exhaust has been designed to mate with a standard 3-1/4" x 10" rectangular duct. If a round duct is required, a rectangular-to-round transition adaptor must be used. Do not use less than a 6" diameter duct.

Rear Exhaust: If a rear or horizontal exhaust is to be used, care should be taken to align exhaust with space between studs, or wall should be prepared at the time it is constructed by leaving enough space between the wall studs to accommodate exhaust.

Maximum Duct Length: For satisfactory air movement, the total duct length of 3-1/4" x 10" rectangular or 6" diameter round duct should not exceed 140 equivalent feet.

ELBOWS, TRANSITIONS, WALL AND ROOF CAPS: etc., present additional resistance to airflow and are equivalent to a section of straight duct which is longer than their actual physical size. When calculating the total duct length, add the equivalent length of all transitions and adaptors plus the lengths of all straight duct sections. The chart below shows the approximate feet of equivalent length of some typical ducts.

Duct

Equivalent Feet

 

 

A. Rectangular-To-round

 

Transition Adaptor

5 ft.

 

 

B. Wall Cap

40 ft.

 

 

C. 90° Elbow

10 ft.

 

 

D. 45° Elbow

5 ft.

 

 

E. 90° Elbow

25 ft.

 

 

F. 45° Elbow

5 ft.

 

 

G. Roof Cap

24 ft.

Filler Panel Kits

JX40CT-Bisque

JX41–Black

JX40WH–White

When replacing a 36" or 42" range hood, this kit fills in the additional width to

provide a custom built-in appearance. For installation between

cabinets only; not for end-of-cabinet installation. Each kit contains two

3"-wide filler panels. Two kits are needed for a 42" opening.

JX22SS - Stainless Steel Decorative Panel Kit When replacing a Hi/Low range with a microwave/convection oven or Spacemaker over a range model, this panel kit fills in the area between the microwave and range left by the H-Low model.

Filter Kits

JX81H–Recirculating

Charcoal Filter Kit

To be used when the Spacemaker microwave oven cannot be vented to the outside.

3/8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

19

depth

 

30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Listed by

Underwriters

Laboratories

Specification Created 7/07

240271

Page 2
Image 2
GE PVM2070SMSS dimensions GE Profile Spacemaker 2.0 Cu. Ft. Over-the-Range Microwave Oven, Duct, Equivalent Feet