Congratulations on the purchase of the Recessed Light Extender. Once installed, you can provide directed light to specific areas around your house.
Getting Started…
The 45155 Recessed Light Extender model requires a “R30” size light bulb. You can use an incandescent, CFL or LED light bulb. Do not use a halogen light bulb.
Includes universal cover ring that
UP TO
8” fits all recessed lighting fixtures up to 8” openings
No tools required
The Recessed Light Extender is very simple to assemble and even easier to install.
The Recessed Light Extender consists of two parts –
1.Light Assembly (ratchet screw base, rocker/swivel mount and securing collar)
2.Cover Ring (alignment pin holes, snap clip holes)
Assembly
1. Remove the Recessed Light Extender Assembly and Cover Ring from packaging. Take note of the alignment pins and snap clips on securing collar.
2.Position the Recessed
Light Extender screw base through the cover ring hole. Position the Alignment pins to the alignment hole on the cover ring.
3. Firmly push the cover ring onto the securing collar snap clips until each clip snaps into place.
See back for troubleshooting
