Wireless
Security
Solutions
RE105 | Temp Range, |
Features
∙Freeze and Overheat warnings.
oCan be used as just Freeze, just Overheat or both simultaneously. o Unique ID’s for each function.
∙Cover tamper.
∙Strong, reliable RF signal.
∙
∙Low Battery indication.
∙3.3x1.4x1.1 inches.
Key Instructions
∙Battery “+” faces towards spring.
∙Enrolling:
Freeze (1st ID): enrolled by tamper switch.
∙This ID is on a label on the battery bucket.
Overheat (2nd ID): enrolled by holding down tamper while installing battery.
∙This ID is not on a label.
Operation
∙Freeze (1st ID)
Alarm: when room temperature drops below 45F.
Tamper: when cover is opened.
Supervisory: every hour.
∙Overheat (2nd ID)
Alarm: when room temperature rises above 100F.
Tamper: when cover is opened.
Supervisory: every hour.
∙Custom temperatures available.
RE105_GE_Temp_Instructions.doc | Page 1 of 3 | 5/4/2012 |
www.ResolutionProducts.com |
| |
Specifications |
|
Freeze Alarm Temp: | 45F +/- 2F (custom temps available) |
Freeze Restore: | when temp increases 4F from alarm |
Overheat Alarm Temp: | 100F +/- 2F (custom temps available) |
Overheat Restore: | when temp decreases 4F from alarm |
Mounting hardware: | # 4 or #6 screws |
Replacement Battery: | CR123A 1550 mAH |
Temperature Range: | 0F to 120F |
Housing dimensions: | 3.3x1.4x1.1 inches |
Specifications subject to change without notice.
Internal Picture
Temp Element
RE105_GE_Temp_Instructions.doc | Page 2 of 3 | 5/4/2012 |
www.ResolutionProducts.com |
| |
