GE Refrigerator [] REPLACE THE BASE GRILLE, [] START THE ICEMAKER, [] SET THE CONTROLS

Installation Instructions
[] REPLACE THE BASE GRILLE
Replace the grille by installing the two
Phillips head screws.
\\ \
[] START THE ICEMAKER
Set the icemaker power switch to the
I(on) position. The icemaker will not
begin to operate until it reaches its
operating temperature of 15°F (-9°C)
or below. It will then begin operation
automatically. It will take 2-3 days to
fill the ice bin.
NOTE:
In lower water pressure conditions, the
water valve may turn on up to 3 times
to deliver enough water to the icemaker.
[] SET THE CONTROLS
Set the controls to the recommended
setting.
55
|=]
lxi
0'F IS RP.C_M_NDE) 37 _FIS RECO_4ENDED
29