ENTER
The ENTER button is used to complete channel
selection for some brands of TV. It is also used to
complete the code entry process.
VOL & CHAN
The VOL (Volume) and CH (Channel) buttons
increase or decrease channel numbers or volume.
MUTE
To MUTE the volume on the TV.
PREV CH
PREV CH allows you to go to the previous channel
you selected. Operates the same as Last Channel,
Go Back or Recall button on your original remote.
0-9
The number buttons operate the same as on your
original remote, and are used for entering device
codes or channel numbers.
MENU
The MENU button calls up the TV and DBS set up
menus.
Activates lighted keys. Keys remain lit for about 10
seconds.
Battery Installation
Your Universal Remote requires four (4)
new AAA alkaline batteries. To install the
batteries:
1.On the back of the remote, push and
slide the cover off.
2.Match the batteries to the + and -
marks inside the battery case, then
insert the batteries.
3.Press and slide the battery cover back
into place.
Note:Programmed codes will remain in
memory for a short period of time allowing
for battery replacement. If batteries have
been dead for a prolonged period of time,
reprogramming may be required.
2
94931 Revised Size 1/22/02 2/26/02 10:37 AM Page 3