Clearing A Learned Button
To clear a learned button sequence, use
the procedure below.
Note: No functions may be stored under
the LEARN, SLEEP, CODE SEARCHor
any of the device buttons.
1. Press and hold the CODE SEARCH
button until the INDICATORLIGHT
lights, then release the CODESEARCH
button.
2. Press an release the desired Mode but-
ton (TV, VCR, CABLE,SAT, etc. . . ).
The INDICATOR LIGHTwill blink off
once the button press is accepted.
3. Press and release the LEARN button twice.
The INDICATOR LIGHTwill light off once the
button press is accepted.
4. Press and release the CODESEARCH button
and the remote will return to original operation
mode. All learned command functions under the
device are now cleared.
Clearing All Learned Buttons
This procedure will erase all learned functions in every device mode.
This step is recommended when attempting any learning of a new
function from a new remote.
1. Press and hold the CODE SEARCH
button until the INDICATOR LIGHT
lights, then release the CODESEARCH
button.
2. Press and release the LEARNbutton
twice. The INDICATOR LIGHTwill
light off once the button press is accept-
ed.
3. Press and release the CODE SEARCH
button and the remote will return to
original operation mode. All learned
command entries are now cleared.
5
CD CBL/SAT
LEARN
LEARN
AUX
94940 Revised Size 10/18/02 12:22 PM Page 6