GE SCB2001K dimensions 36-3/4 Min

SCB2001K

GE Profile Advantium® Wall Oven

Dimensions and Installation Information (in inches)

Order a 30” wide single oven cabinet or cut the opening in a wall to dimensions shown.

Single	Speedcook Oven Installation	Speedcook Oven Installation
Speedcook Installation	above a GE Warming Drawer	above a single GE Built-In Wall Oven

Note: The rough opening must be:

•Depth – 19” Min.

•Width – 28-1/2” Min.

•Height – 21” Min.

•36-3/4” from the floor to the cutout is required.

•These ovens require 3/4” overlap on each side, top and bottom of the cutout.

•Oven overlaps will conceal cut edges on all sides of the opening.

Note: For installation above a warming drawer additional clearance between the two cutouts may be required. Check to be sure the oven supports above the Warming Drawer location do not obstruct the required interior 23-1/2” depth and 9-1/4” height.

19

Min

28-1/2

30	24	30
	Min.
	28-1/2
21	2 Min.	21

9-1/4

36-3/4 Min.

Required

24 30 Min.

28-1/2

2 Min.

21

Per Oven

Requirement

Installation Information: Before installing, consult installation instructions packed with product for ­current dimensional data.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

		36-3/4 Min.
Construct Solid	Install	Construct Solid
Bottom Min. 3/8"	2 x 4 or 2 x 2	Bottom Min. 3/8"
Plywood	Runners or	Plywood
Supported by	Solid Bottom,	Supported by
2 x 4 or 1 x 2	Must Support	2 x 4 or 1 x 2
Runners, all	100 lbs.	Runners, all
Four Sides		Four Sides

*45-1/4

Construct Solid Bottom Min. 3/8" Plywood Supported by 2 x 4 or 1 x 2 Runners, all Four Sides

Listed by Underwriters Laboratories

Specification Revised 2/07 240440