Automatic Icemaker

Automatic icemaker

Stainless Steel Refrigerator

NOTE: A newly installed refrigerator may take 12 to 24 hours to begin making ice.

The icemaker will produce seven cubes per cycle—approximately 100–130 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other use conditions.

If the refrigerator is operated before the water connection is made to the icemaker, set the power switch in the O (off) position.

When the refrigerator has been connected to the water supply, set the power switch to the l (on) position.

The icemaker will fill with water when it cools to 15°F (–10°C). A newly installed refrigerator may take 12 to 24 hours to begin making ice cubes.

You will hear a buzzing sound each time the icemaker fills with water.

Throw away the first few batches of ice to allow the water line to clear.

Be sure nothing interferes with the sweep of the feeler arm.

When the bin fills to the level of the feeler arm, the icemaker will stop producing ice. It is normal for several cubes to be joined together.

If ice is not used frequently, old ice cubes will become cloudy, taste stale and shrink.

Special notes:

•Dispenser models have a tilt-out ice bin. The bin can be tilted out as shown in the illustrations, and it will hold itself up while you take ice out or turn the icemaker power switch on and off. Be sure to put the bin back in place before closing the door.

•To restore your ice level from an empty bucket stage, the following steps are recommended:

112 hours after the first batch of ice has fallen into the bin, dispense 3 to 4 cubes.

2After an additional 6 hours, dispense 3 to 4 cubes again.

These steps will restore your ice level in the shortest amount of time.

NOTE: In homes with lower-than-average water pressure, you may hear the icemaker cycle multiple times when making one batch of ice.

Power Switch

Icemaker

Green

Feeler Arm

Power Light

To access ice or reach the power switch:

1Lift the bin, then pull it forward until the bin stops.

2Lower the bin to access ice or reach the power switch.

NOTE: In order to take full advantage of the tilt-out ice bin, only store items on the shelf below the ice bin that are no taller than the lowest point on the bin.

17

Page 16 Page 18
Page 17
Image 17
GE Side-by-Side Stainless Steel Free-Standing Refrigerators owner manual Automatic icemaker, Special notes
Page 16 Page 18

Side-by-Side Stainless Steel Free-Standing Refrigerators specifications

GE Side-by-Side Stainless Steel Free-Standing Refrigerators stand out as a remarkable blend of style, innovation, and functionality, designed to meet the diverse needs of modern kitchens. These refrigerators are not just appliances; they represent a commitment to quality and convenience in food storage.

One of the defining features of GE's side-by-side models is the spacious layout that offers easy access to both refrigeration and freezing compartments. This thoughtful design allows homeowners to organize their food items effectively, with clear visibility into the refrigerator's contents. The side-by-side configuration also maximizes efficiency in tight spaces, making it ideal for kitchens that may have limited square footage.

Another highlight of these refrigerators is their sleek stainless steel finish. This not only adds a touch of elegance to any kitchen decor but is also resistant to fingerprints and smudges, ensuring the appliance remains low-maintenance. The glossy surface is easy to clean and enhances the overall aesthetic of your kitchen.

GE refrigerators come equipped with advanced technologies that improve food preservation and energy efficiency. The Turbo Cool setting rapidly lowers the refrigerator's temperature after frequent door openings, ensuring that food stays fresh even during busy cooking times. Additionally, the built-in water and ice dispenser provides filtered water and ice at your fingertips, promoting hydration and convenience for households.

Smart technology integration is another significant advantage of GE side-by-side models. Many units feature Wi-Fi connectivity, allowing users to monitor and control their refrigerator from a mobile device. This capability includes temperature adjustments and alerts for maintenance issues, ensuring peace of mind for homeowners.

Energy efficiency is a crucial characteristic of these refrigerators. GE designs them with Energy Star certification, meaning that they consume less energy without compromising performance. This not only reduces electricity bills but also underscores a commitment to sustainable practices in appliance manufacturing.

Inside the GE side-by-side refrigerator, adjustable shelves and door bins provide customizable storage options. The humidity-controlled crisper drawers keep fruits and vegetables fresher for longer, while bright LED lighting illuminates the interior for easy visibility, even in low-light conditions.

In conclusion, GE Side-by-Side Stainless Steel Free-Standing Refrigerators combine style, advanced technology, and energy efficiency. Their user-centric design features superior food preservation and easy organization, making them a valuable addition to any modern kitchen. Whether you are upgrading your current appliance or outfitting a new home, GE refrigerators deliver reliability and elegance for today's lifestyles.
Top Page Image Contents