GE Simon Security System

Simon Security System

3. Press Add from the Start menu. Panel announces, Select from main menu

4. Press Option #. Panel announces, Option 1, press again for next option or done to

select.

5. Press 02. Panel announces, Option 2, press again for next option or done to select

6. Press DONE. Panel announces, Option 2 is on.

Delete disables the panel voice.

Note

The panel voice is always on

for status messages, open

sensor responses and when

in program mode.

1. Open panel cover. Panel announces, Use numbered keys to enter ID.

2. Enter Access Code using the numbered keys. Panel announces, Please select from

Start Men u.

3. Press Delete from the Start menu. Panel announces, Select from main menu

4. Press Option #. Panel announces, Option 1, press again for next option or done to

select.

5. Press 02. Panel announces, Option 2 press again for next option or done to selec t.

6. Press DONE. Panel announces, Option 2 deleted.

Option 03 - Latchkey Time

Adding this option allows you to program Latchkey Time. Latchkey is used to notify

parents if children do not arrive hom e and disarm the system at a predetermined time.

Note

The system clock must be

set for Latchkey to function.

1. Open panel cover. Panel announces, Use numbered keys to enter ID.

2. Enter Access Code using the numbered keys. Panel announces, Please select from

Start Men u.

3. Press Add from the Start menu. Panel announces, Select from main menu

4. Press Option #. Panel announces, Option 1, press again for next option or done to

select.

5. Press 03. Panel announces, Option 3, press again for next option or set latchkey

hours and minutes, then press done.

6. Press Hours and Minutes to set the time.

7. Press DONE. Panel will announce Latchkey time that has been set.

Delete turns off this option and Latchkey cannot be enabled when the panel is armed.

1. Open panel cover. Panel announces, Use numbered keys to enter ID.

2. Enter Access Code using the numbered keys. Panel announces, Please select from

Start Men u.

3. Press Delete from the Start menu. Panel announces, Select from main menu

4. Press Option #. Panel announces, Option 1, press again for next option or done to

select.

5. Press 03. Panel announces, Option 3, press again for next option or done to delete.

6. Press DONE. Panel announces, Option 3 deleted.

Option 36 and 37- Sensor Activated Light Lockout Start and

Stop Time s

Adding these options lets you control when sensor activated lights are active. The panel

will not turn on a light between the programmed start time (option 36) and the pro-

grammed stop time (option 37), ev en if sensor activated lights are on. Both options

must be programmed for this option to work correctly.

For example, if you don’t want sensor activated lights to be active during daylight

hours, set the lockout start time to begin at dawn and set the stop time (option 37) to

coincide with sunset.

Option 36: Sensor Activated Light Lockout Start Time

Add enables sensor activated light lockout start time (midnight to 11:59 P.M.).

1. Open panel cover. Panel announces, Use numbered keys to enter ID.

2. Enter Access Code using the numbered keys. Panel announces, Please select from

Start Men u.

3. Press Add from the Start menu. Panel announces, Select from main menu