GE TNX22BRCWW dimensions Case Dimensions in inches/cm, Clearances, 69-7/8 70-7/16, trim flange

TNX22BRCWW - GE Profile Performance™ 21.7 Cu. Ft. CustomStyle™ No-Frost Top-Freezer Refrigerator with Dispenser

Case Dimensions (in inches/cm.)

69-7/8

70-7/16

36-5/8

35-3/4

23-3/4

26-3/4

Clearances

	Handle Side Clearance
	–At least 2" (51 mm) on the handle side for fingertip clearances.
	Top and Bottom Clearance
	–At least 3/16" (4.75 mm) at the top and bottom edges to allow for
	trim flange.
	Hinge Side Clearance
	• A 3/4” (19 mm) thick door panel may strike thje adjacent countertops
	when the door is fully opened. Therefore, the hinge side clearance to
	raised panel will vary according to installation situation.
	–Allow 1-3/4” (44 mm) clearance when installation does not include
28-3/8	side panels.
	–The installation of 3/4" (19 mm) thick side panels requires less
	clearance because the space between the door and adjacent
	countertop is wider.

61• To avoid door contact to countertop consider: –Miter the corner of the adjacent countertops 45°, or –pull the refrigerator forward enough to avoid contact.

IMPORTANT: Before finalizing specifications for your GE Profile Performance™

CustomStyle™ Refrigerator, Please NOTE:•A minimum of 36" is required for refrigerator installation

•Be sure to allow for 1/2" or 3/4" side panels in addition to the 36" minimum

Top View

Front View

Specification Revised 10/99

VOLUME and

SHELF AREA

Manufacturer Certified toASSOCIATION OF HOME

APPLIANCE MANUFACTURERS

ANSI/AHAN HRF-1-1979

Total volume and shelf area are calculated by the Association of Home Appliance Manufacturers’ standards.

For answers to your Monogram,® GE Profile Performance Series,™GE Profile™ or GE appliance questions, call GE Answer Center® service, 800.626.2000.Listed by

Underwriters ®

RLaboratories

C US