Safety Instructions
Operating Instructions
About washer features.
|
|
| Autosoak Option (on some models) | |
|
|
| ||
|
|
| ||
|
|
| This option begins with a brief agitation, soaks for a specified period of time, then moves | |
|
|
| through the rest of the cycle automatically. On some models, this option is located on the | |
|
|
| ||
|
|
| ||
|
|
| Cycle Selector knob. | |
|
|
| 2nd Rinse Option (on some models) | |
|
|
| When you use extra detergent or bleach to clean heavily soiled clothes, you may want to | |
|
|
| use the 2nd Rinse option. It provides a second deep cold rinse. | |
|
|
| Extended Spin Option (on some models) | |
|
|
| ||
(Appearance and features may vary) | ||||
Use this option to extract more water from your clothes. Clothes will be drier when this | ||||
|
|
| ||
|
|
| option is selected, and will dry more quickly in your dryer. | |
|
|
|
| |
|
|
| PerfecTemp (on some models) | |
|
|
| PerfecTemp senses the incoming water temperature and adjusts the fill water to obtain a more | |
|
|
| precise temperature range for all three wash temperatures. You may select cold, warm or hot. | |
PerfecTemp | For example, in a Cold Wash selection, some warm water may be added to reach a | |||
temperature needed to better dissolve detergents. Often, detergents are not completely | ||||
|
|
| ||
|
|
| dissolved in very cold water, especially in cooler climates. | |
|
|
| NOTE: PerfecTemp will not adjust the fill on WARM WASH unless the washer lid is closed. | |
|
|
| Be sure to start the washer after the lid is closed. | |
|
|
|
| |
|
|
| The Agitator Cap or Fabric Softener Dispenser (depending on model) | |
Troubleshooting Tips
The agitator cap fits into the top of the agitator. If it accidentally comes off, simply put it back on.
The fabric softener dispenser automatically releases liquid fabric softener at the proper time during the cycle.
Do not stop the washer during the first spin. This will cause the dispenser to empty too soon.
To use, follow these steps:1 Make sure dispenser is securely attached to agitator.
2 Use only liquid fabric softener. Pour into dispenser, using amount recommended on package.
3 Add water to dispenser until it reaches the maximum fill line.
Do not pour anything into the agitator if the agitator cap or dispenser is removed.
Consumer Support
6
