GE ZDP36L4DWSS-36 Professional Ranges, Monogram, Dimensions and Specifications in inches

Monogram.™

ZDP36L4DWSS—36" Professional Ranges

Dimensions and Specifications (in inches)

36" Wide Range Hood

	4"	13"
		Max.	36" Min. to
	12"	12" Min. to	Combustible
18" Min.
	12"	Combustible	Material From
4"		Material	Cooking Surface
	Cooking Surface	Each Side

3/-1/4"

3/-1/2"

Electrical Supply

Gas Supply

35-3/8" Max. for Counter Level

36-3/4" Max. with Range Leveling Legs Fully Extended

If the range is installed in an island:

•Allow 12" min. clearance at the back to combustible materials.

•Allow 36" min. above the cooking surface to combustible materials.

•The vent hood must provide at least 600 CFM and up to 1200 CFM.

•Installation must conform with local codes. In the absence of local codes, the range must comply with the National Fuel Gas Code, ANSI Z223.1-1990.

A.G.A. approved

Installation Information:

Before installing, consult installation instructions (Pub. #49-8786) packed with product for current dimensional data.

29-1/16"

12"

3-1/4"

High

36" Min.

12" Min. to Combustibles Without Backguard

21-1/4"	Shelf
12"	Low Back

0" Clearance

28-1/4"

31-1/2"

45-5/8"

Revised 7/97

to Combustibles

36" Min.

to Combustibles

1-1/2"

Island Trim

0" Clearance

For answers to your GE Monogram,™ GE Profile,™

GE, Hotpoint and RCA appliance questions, call

GE Answer Center® service, 800.626.2000.

UL	Listed by
	Underwriters
R	Laboratories