GE ZEU36KSK/WK/BK dimensions GE Monogram 36 Ribbon Cooktop, Electrical Requirements

ZEU36KSK/WK/BK

GE Monogram® 36" Ribbon Cooktop

Dimensions and Installation Information (in inches) Combination Installations

21-1/4" at

Consideration must be given to the electrical supply locations when the cooktop is installed with other products in the same cabinet. Always refer to each product's installation instructions for clearances and electrical requirements.

•Install these cooktops with any exhaust hood of the same or greater width; 300 CFM or greater air flow.

*3-1/4"

1-3/4"

Min.

36" center

2" Min. to Side Walls

•The cooktop may be installed with a 36" Monogram downdraft vent.

Electrical Requirements

Product rating is 120/208V or 120/240V, 60Hz. For 240V, connect to a 40-amp circuit; connect to a 30-amp circuit for 208V operation. The cooktop must be connected to a supply circuit of the proper voltage and frequency and protected by a time-delay fuse or circuit breaker.

19-1/8" 33-7/8"

2-1/2" Min. to Front Edge

*3-1/4" deep at the front. 4-5/8" deep at the rear conduit location. Allow 5" minimum clearance below the cooktop bottom to combustible materials.

16" Min

Junction

Box

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Listed by

Underwriters

Laboratories

R

Specification Created 12/04

130250