6
Insert the cooktop centered into the
cutout opening. Make sure the front
edge of the countertop is parallel to
the cooktop. Make final check that all
required clearances are met.
Open the cabinet door and screw the Hold
Down Brackets to the cabinet sides with the
screws provided.
COOKTOP
Hold
Down
Bracket
Insert
Cooktop
Into
Cutout
Attach
Hold Down
Brackets to
Cabinet
MOUNTING
SCREW
BURNER BOX
SIDES
CABINET
SIDE USE SUITABLE
FASTENERS FOR
ANCHORAGE IN
CABINET SIDES
Installation
Electronic Radiant Cooktop
Apply the foam strips around the outer edge
of the glass. Do not overlap the foam strips.
Attach
Foam Strips
Foam Strips
Bottom of
Cooktop
Cooktop
Glass
Remove the hold down brackets and
screws from the literature package.
MOUNTING
SCREW
Locate
Mounting
Parts
Screw the Hold Down Bracket to the side of
the cooktop unit. Repeat for opposite side
of cooktop.
Attach
Brackets to
Cooktop
Foam Strips
Bottom of
Cooktop
Cooktop
Glass
Pre-drilled
hole
IMPORTANT: If the cooktop
is being installed into a blind
counter (one with no cabinet
opening below), wire connections
must be made before putting the cooktop
into the cutout opening.
!