ZIC360NX
GE Monogram® 36"
Dimensions and Installation Information (in inches)
3/4" Overlay Panel Dimensions
1/4" Framed Panel Dimensions
If you choose to install framed panels, they must be cut to the dimensions shown. The panels will slide into the frame on the door, drawer and grille.
If the custom panel is less than 1/4" thick, and it fits loosely
in the door frame, it can be backed up with a piece of filler material or foam tape to improve the fit.
Important Note: Maximum weight for fresh food panel is 50 pounds, 30 pounds for freezer drawer panel and 11 pounds for the grille panel.
Door/ Drawer
5/16" Trim Reveal
1/4"
Panel
For a more custom appearance, overlay panels may be installed on trimmed models. The overlay panel must be secured to a 1/4"- thick backer panel which slides into the trim. A spacer panel 0.10" thick must be placed between the overlay and backer panel.
.250" + .10" + .750" =
1.100" Total Panel Thickness
Center each panel over the other. Assemble the panels with glue and screws. Screws must be counter-
Door/ |
| Overlay |
Drawer |
| |
|
| Panel |
1/4"
Backer .10"
Panel Spacer
Overlay Panel
Spacer Panel
A
Grille Panel |
|
|
|
| B | ||
|
|
|
|
|
|
|
|
sunk into the backer panel.
Backer Panel
Fresh Food |
|
|
|
|
|
| |
| C | ||
Panel |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Freezer Drawer D
Panel
Framed Panel Dimensions (in inches)
|
| A (Width) | B (Grille Ht.) | C (FF Ht.) | D (FZ Ht.) |
|
| 1/4" Framed | |||
|
| 3/4" Overlay Panel Dimensions (in inches) |
|
| |
|
| A (Width) | B (Grille Ht.) | C (FF Ht.) | D (FZ Ht.) |
|
| 1/4" Backer Panel | |||
| .10" Spacer Panel | ||||
3/4" Overlay | 9 | 22 |
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
NOTE:
ZUG2 Grille Panel Dimensions
The ZUG2 Unified Grille Panel Kit will accept a framed or overlay grille panel.
•Assemble the overlay panel in the same manner as the door and drawer panels.
A
|
|
|
|
|
|
|
|
|
| Grille Panel |
|
| B |
| |
|
|
|
|
|
|
|
|
Framed Panel Dimensions |
|
|
|
|
| ||
|
| A (Width) | B (Height) |
| |||
1/4" Framed Panel |
|
|
|
| |||
Overlay Panel Dimensions |
|
|
|
|
| ||
|
| A (Width) | B (Height) |
| |||
1/4" Backer Panel |
|
|
|
| |||
.10" Spacer Panel |
|
|
|
| |||
3/4" Overlay Panel | 9" |
|
|
|
|
Listed by
Underwriters
Laboratories
Specification Created 6/08 | 110112 |