ZIDI240PII – GE Monogram
(Custom panel required)
ZIDS240PSS – GE Monogram
(Stainless steel)
Grounding the Double-Drawer Refrigerator
IMPORTANT – (Please read carefully)
FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.
The power cord of this appliance is equipped with a
Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.
3/4” Overlay Panel Dimensions
Model ZIDI240PII requires
•The overlay panels must be secured to a 1/4" thick backer panel which slides into the trim. A .10" thick spacer panel must be placed between the custom and backer panel.
•Custom handles of your choice, supplied by your cabinet maker, must be installed on the overlay panels.
Overlay
Panel
Door
1/4"
Backer .10 Inch
Panel Spacer
When a standard
DO NOT, UNDER ANY CIRCUMSTANCES,
CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD.
DO NOT USE AN ADAPTER PLUG TO CONNECT THE REFRIGERATOR TO A
DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE.
A
1/4" Gap
3/4" Overlay Panel Dimensions (in inches)
| A (Width) | B (Height) |
1/4" Backer | ||
0.10" Spacer | ||
3/4" Overlay |
NOTE: Max. assembled drawer panel weight is 25 lbs.
IMPORTANT: Maintain a 1/4" gap between the panels when installed.
Assemble overlay panels with glue and screws.
•Center spacer panel on the backer panel, left to right and top to bottom.
Secure the panels with glue.
•Center the spacer/backer panel on the overlay panel. Secure with glue and screws. Countersink screws into the backer panel.
Overlay Panel
Spacer Panel
Backer Panel
Listed by
Underwriters
R Laboratories
| For answers to your Monogram,® GE Profile™ or |
| GE® appliance questions, visit our website at |
Specification Created 3/04 | GEAppliances.com or call GE Answer Center® |
service, 800.626.2000. |
120030