– 9 –

The outer case is made of prepainted galvanized
steel. The fresh food and freezer liners are
painted metal with a smooth finish. The liners are
not removable or replaceable.

Machine Compartment

The machine compartment is located on the top of
the unit and has a movable chassis that can be
extended from the front of the unit to provide
access to the refrigeration system components.
Caution: Avoid kinking the refrigeration lines when
sliding the chassis out and back in.
To extend the chassis:
1. Remove the grille panel by removing 2 screws
from each side (see photo).
2. Remove the wire guard and rocker switch
panel.
3. Remove the condenser baffle.
4. Loosen 2 (7/16-in.) track bolts from the front of
the chassis track.
5. Remove 2 (7/16-in.) rear track bolts and the
spacers under the rear of the chassis track.
6. Pull the chassis forward until it reaches the
stops in the tracks, working the refrigeration
tubing as you pull the chassis out.
Note.
•When sliding the chassis back into position, be
certain the lines and wiring have not fallen
behind the chassis.
•Use the grille screws for adjustment when
realigning the grille.
Cabinet
The Master Light Switch (Sabbath switch) is
located behind the grille panel.
Machine Compartment
Chassis
Rear Track Bolts
Rear Track Bolts
Front Track Bolts
Front Track Bolts
2 Screws
Condenser
Baffle