For your safety
Care and Cleaning
Stainless Steel Hood
Before servicing or cleaning the unit, switch power off at the service panel and lock the service panel to prevent power from being switched on accidentally. If the service panel cannot be locked, fasten a tag or prominent warning label to the panel.
Metal grease filters
Clean the grease filter after 30 hours of “on” time. A signal light will alert you when 30 hours has passed.
Remove the grease filters and wash them either by hand or in the dishwasher using
To clean, swish the filters in hot soapy water or wash them in the dishwasher. Do not use abrasive cleansers.
NOTE: To remove filters, push them back and down using the knob.
Front 
For proper operation, be sure to use
the lower set of filter holders.
Charcoal filters
(on some models)
If the model is not vented to the outside, the air will be recirculated through disposable charcoal filters that help remove smoke and odors.
The charcoal filters should be replaced when they are noticeably dirty or discolored (usually after 6 to 12 months, depending on hood usage).
NOTE: DO NOT rinse, or put charcoal filters in an automatic dishwasher.
The charcoal filters cannot be cleaned. They must be replaced.
Order Charcoal Filter Kit (3 filters) WB02X10731.
This kit can be ordered from your GE Supplier.
NOTE: To remove the metal filters, push them back and down using the knob. Push the charcoal filters back and down using the tab.
Charcoal Filters
Front 
Metal Filters 
For proper operation, be sure to use the charcoal filters in the upper set of filter holders and metal filters in the lower set of filter holders.
6
