Using the bridge surface unit
The three controls on the left side of the control panel can be used to create an oblong heated area.
Because of its bigger dimensions, larger pans can be used on the bridge surface unit.
Choose pans that match the circle/bridge area as closely as possible.
Make sure the pan rests flat on the glass cooktop and it is not resting on the trim. If you notice poor cooking performance, move the pan to make sure it is flat on the cooktop.
You can use each element separately or you can use both elements combined with the bridge element between them.
To use each circular element separately, turn the bridge select knob to “•” then turn either control knob to the desired setting. The controls can be set to any intermediary position required.
Use the bridge select knob on the right to turn on the bridge between the two elements by turning it to “••.”
In order to have an even heat distribution, both control knobs should be in the same position when using the bridge.
6 | 1 | 6 | 1 |
5 | 2 | 5 | 2 |
4 | 3 | 4 | 3 |
Control knob for the left | Control knob for the right | ||
side of the bridge. | side of the bridge. | ||
|
| Turn to this setting to use both | |
|
| elements combined with the bridge | |
|
| element between them. | |
The elements will |
|
|
|
operate separately |
|
| |
at this setting. |
|
|
|
Bridge select knob
Left | Right |
element | element |
| Bridge |
Dual surface unit and control knob
The dual surface unit has two cooking sizes to select from so you can match the size of the unit to the size of the cookware you are using.
The controls are variable and can be set to any intermediary position required.
To use the large surface unit, turn the coil select knob to the position marked “•”. Push in and turn the control knob to the desired setting. The unit will heat the entire area contained by the larger circle.
To use the small surface unit, turn the coil select knob to the position marked “•”. Push in and turn the control knob to the desired setting. The unit will only heat the area inside the smaller circle.
6 
1
52
4 3
Control knob for the dual | Coil select knob |
surface unit. |
|
9
