GE Monogram dimensions ZBD1800GSS - GE Monogram 18 Dishwasher, Specification Created 3/04

ZBD1800GSS – GE Monogram™ 18" Dishwasher

Dimensions and Specifications (in inches)

This Wall Area Must be

Free of Pipes or Wires

•The dishwasher must be installed so that the drain hose is no more than 10 feet in length for proper drainage.

•The dishwasher must be fully enclosed on the top, sides and back, and must not support any part of the enclosure.

4 24"

34" to 35"	min.
Floor to
Underside of	6"
Countertop
17-5/8" Min.
18" Max.
Plumbing and Electric Service
Must Enter Inside This Area	34" - 35"*

CLEARANCES:

When installed into a corner, allow 2" min. clearance between dishwasher and adjacent cabinet, wall or other appliances. Allow 25-5/8" min. clearance from the front of the dishwasher for door opening.

Countertop

Dishwasher

25-5/8"

Clearance for Door

Opening 2" Minimum

22-1/2"

17-1/2"

Installation Information:

ADA-Compliant ZBD1800GSS:

Installation below 34"-high countertops

Areduced-height installation (32-1/2" min.) beneath a 34" countertop can be accomplished by removing the front leveling legs. The rear legs should be screwed in flush with the bottom support, as shipped. The front of the dishwasher must be shimmed to level it. Water and electrical must be routed through the back wall.

Electrical Requirements

The dishwasher must be supplied with 120V, 60Hz, and connected to an individual properly grounded branch circuit protected by a 15- or 20-amp circuit breaker or time-delay fuse.

Before installing, consult installation instructions packed with product, or available at Monogram.com, for current dimensional data.

		As an ENERGY STAR®
	Listed by	partner, GE has determined
		that this product meets the
	Underwriters
		ENERGY STAR guidelines
R	Laboratories
		for energy efficiency.

	For answers to your Monogram ® GE Profile™ or
	GE® appliance questions, visit our website at
Specification Created 3/04	GEAppliances.com or call GE Answer Center®
	service, 800.626.2000.

150047