ZBD6880KSS
ZBD6800KWW/BB – GE Monogram Fully Integrated
Dimensions and Specifications (in inches)
•The dishwasher must be installed so that the drain hose is no more than 10 feet in length for proper drainage.
•Water and power supply should enter in the shaded area.
•Electrical and water connections are at the right front of the dishwasher. The hot water line should extend forward 30" to 40" from the rear wall. The electrical must extend forward at least 24" to reach the junction box.
•To prevent siphoning, an air gap must be used when the waste tee or disposer connection is less than 18" above the floor.
This Wall Area Must be
Free of Pipes or Wires
4" | 24" |
34" to 35" | min. |
| |
Floor to |
|
Underside of | 6" |
Countertop | |
24" |
|
Plumbing and Electric Service
Must Enter Inside This Area
34" - 35"*
24"
24"
Electrical Requirements
The dishwasher must be supplied with 120V, 60Hz, and connected to an individual properly grounded branch circuit protected by a 15- or
Specification Revised 8/04
Listed by
Underwriters
RLaboratories
As an ENERGY STAR® partner, GE has determined
that this product meets the ENERGY STAR guidelines
for energy efficiency.
For answers to your Monogram ® GE Profile™ or GE® appliance questions, visit our website at GEAppliances.com or call GE Answer Center® service, 800.626.2000.
150041